Description Article code DS-260-3 DMX Splitter 2x1 in 3 or 12601005 1x1 in 6 - XLR 3pole DS-260-5 DMX-Splitter 2x1 in 3 or 12601003 1x1 in 6 - XLR 5pole Info DMX Splitters General description It is usually necessary to use CONNEX DMX splitters with complex lighting systems as only the securing and proces- sing of signals guarantees perfect control functions. Simply adding  tracks  together  can  lead  to  an  error  being  multi- plied which in turn can result in the entire system being impaired.  CONNEX  DMX  splitters  prevent  this  from  hap- pening, in addition, it is easier to limit faults as only indi- vidual  groups  are  affected  and  not  the  entire  system. Signals  are  processed  in  accordance  with  RS422/RS485, USITT  DMX-512 and AVAB standards. Description Article code DS-130-3 DMX-Splitter 1 in 3 - XLR 3pole 12601004 DS-130-5 DMX-Splitter 1 in 3 - XLR 5pole 12601002 DS-130 DMX Splitter •  1x input (ESD protected), 3x output •  All interfaces galvanically separated •  One power pack for each interface •  Integrated DMX input tester with display •  Buffer amplifier (booster) •  Ground lift and phase position switch •  Available as 3 pole or 5 pole DS-260 DMX Splitter •  2x input (ESD protected), 6x output •  All interfaces galvanically separated •  One power pack per interface •  Integrated DMX input tester with display •  Buffer amplifier (Booster) •  Ground lift and phase position switch •  Switch selector between »2x1 in 3« and »1x1 in 6« •  Available as 3 pole or 5 pole DS-130/260 Mains input:    90–240 Volt AC, 50/60 Hz, Class of protection I Input:    Neutrik 5 pole XLR socket male, galvanically separated (potential free) RS 422 / RS 485 symmetrical signal for DMX-512 and AVAB Signal amplification using  ESD protected interface module Input tester:    Signal display LED red for Pin 2, Pin 3 and missing screening Operating elements:    Input Groundlift, Input Phase-Reverse Output:    Neutrik 5 pole XLR socket female, galvanically separated (potential free) RS 422 / RS 485 symmetrical signal for DMX-512 and AVAB Signal amplification using ESD protected interface module Output control LED green for each output Configurations:    DS-130: 1 input -> 3 outputs DS-260:2x 1 input -> 3 outputs or 1 input -> 6 output Insulation:    all inputs and outputs are de-coupled using opto-couplers Each input and output has its own power pack Protocol:    in compliance with USITT  / DIN DMX-512/1990, DMX-512/2000, AVAB Dimensions:    19", 1U, 483 mm x 190 mm x 44 mm, 1,5 kg Certificates:    CE (EN60335, EN 55022) Data DS-130/260 DMX Splitter DMX Stageboxes with Multicore General description The  drum  stagebox  simplifies  handling.  It  can  be  set  up next to the lighting mixing console and also enables e.g. a console   and   a   scanner   controller   to   be   connected. Alternatively an intercom system can also be connected via the second signal path. Description Article code DS-300-3 DMX-Splitter 1 in 3 12601007 XLR 3pole compact unit DS-300-5 DMX-Splitter 1 in 3 12601006 XLR 5pole compact unit Beschreibung Artikelcode DMX Stagebox DMX with 25 m cable 12600001 DMX Stagebox DMX with 50 m cable 12600002 DMX Stagebox DMX with 75 m cable 12600003 DMC-2 DMX cable drum stagebox •  SCHILL  metal drum •  EUROCABLE DMX2 multicore •  Two individually insulated and screened signal lines and one 3x1,0mm2 mains cable •  Bonding pad with two NEUTRIK 5-pole (M) connectors and a li2ft-up lid socket •  Splice 1 m with two NEUTRIK 5-pole (F) connectors and a solid rubber plug Info DS-300 DMX Splitter •  Technical features as  DS-130 •  Hanging device •  All control lights can be seen from the base •  PowerCon mains connection 90–240 Volt •  Mains cable included in delivery Application •  Signal enhancer •  Signal distribution •  DMX tester Use •  Lighting control systems